自动高压电容器组
自动高压电容器组设计用于HV网络功率水平可变的应用。这种类型的设备，通常在2到4之间的步骤，以避免电气网络中电容器的连接和断开的后续现象，由MCX控制器控制，其定时和调节进入根据负载水平的步骤，考虑到HV本身的等待时间，在连续的连接之间是600秒，这个时间可以减少到不到10秒。如果我们安装快速放电TP
这些设备配备：
- 金属外壳。
- APR与融合指示器熔断（取决于电源电压）。
- 真空或SF6接触器/ SF6断路器（取决于电源电压）。
- 用于限制开关电流的电抗。
- 三相或单相高压电容器LIFASA配有内部保险丝（取决于电源电压）。
- 控制面板包括无功功率控制器，信号和机动。
功率范围
- 从每步50 kvar到所需功率。完全可定制。
- 高达36 kV的最大绝缘电压。
处方和设备设计
LIFASA作为电容器和补偿设备的制造商，为每种安装设计和计算合适的解决方案提供经验和知识。
Automatic high voltage capacitors bank
Automatic HV capacitor banks are designed for applications where HV network power levels are variable. This type of equipment, with a number of steps usually between 2 and 4 to avoid consequent phenomena in the installation of the connection and disconnection of the capacitors in the electrical network, is controlled by a controller type MCX, which timers and regulates the entry of the steps according to load levels, taking into account the waiting times of HV itself, which between consecutive connections is 600 s., this time can be reduced to less than 10 s. if we install fast discharge T.P.
These equipments are equipped with:
- Metallic Enclosure.
- APR fuses with fusion indicator (depending on mains voltage).
- Vacuum or SF6 contactor / SF6 circuit breaker (depending on mains voltage).
- Reactances for limiting the switching currents.
- Three-phase or single-phase HV capacitors LIFASA equipped with internal fuses (depending on the mains voltage).
- Control panel including reactive power controller, signals and maneuvers.
Power range
- From 50 kvar per step up to the requested power. Fully customizable.
- Up to 36 kV maximum insulation voltage.
Prescription and equipment design
LIFASA, as a manufacturer of capacitors and compensation equipment, offers its experience and knowledge for the design and calculation of the most suitable solution for each installation.
