产品描述? Description

大型冲压标记

• 辊压模具永久性地印在材料上
• 尽可能大，同时仍可沿插座的曲面读取
• 清晰可见的尺寸编号和超深轮廓

Large, Stamped?Markings

• Permanently impressed into the material by a roll-stamp die
• As large as possible while still being readable along the socket’s curved surface
• Clearly visible size numbers with extra-deep outline

全阶式的肩部

较小的深长尺寸会缩小直径，延伸到插槽的底部。这样可以更大程度地进入狭窄的凹陷区域。

Fully Stepped?Shoulders

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.

外观+室内饰面

• 镀铬的外壳具有很高的耐腐蚀性，可将镜面擦拭干净
• 内部采用透明涂层（而不是常用的金属漆）进行防锈保护

Exterior + Interior?Finishes

• Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
• Interior is protected against rust with clear coat, rather than commonly-used metallic paint

6点插座开口

为六角紧固件提供精确的配合和更大的接触

6-Point?Socket Opening

Provides an exact fit and maximum contact for hex fasteners

防止紧固件变圆

Prevents Fastener?Round-Off

弧形拐角可通过向紧固件的平坦侧而不是角施加力来防止紧固件变圆。

Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners.

安全驱动工具的参与

• 四个定位槽可与驱动工具的固定球牢固连接
• 倾斜的内缘有助于将套筒引导到其他工具上

Secure?Drive Tool Engagement

• Four detent grooves provide a secure connection with the retaining ball of a drive tool
• Beveled inner rims help guide the socket onto other tools

高扭矩强度

符合ANSI标准证明扭矩的至小值1.2倍。通过单周期测试进行验证，该测试可施加扭矩直至达到指定值，而不会出现故障或永久变形。

High?Torque Strength

Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation.

公制系列 METRIC SERIES

英寸系列? INCH SERIES

90齿棘轮

• 4度摆弧
• 紧凑头在不同尺寸上均减小
• 快速释放驱动器将插槽锁定在柄脚上，并通过按一下按钮释放

90-Tooth?Ratchet

• 4-degree swing arc
• Ultra-compact head is reduced in all dimensions
• Quick-release drive locks sockets onto tang and releases with the press of a button

包含配件

Included?Accessories

3和6英寸扩展

越过障碍物进入狭窄的空间。滚花带可为拉紧或松开的紧固件提供抓地力。

3 and 6 Inch Extensions

Reach past obstructions and into tight spaces. Knurled band provides grip for starting or turning loosened fasteners.

万向节

销形接头顺畅旋转并连续旋转，以至大55度角接入紧固件。

Universal Joint

Pin-style joints rotate smoothly and continuously to access fasteners at up to 55-degree angles.

旋转手柄

将套筒像带起子手柄的螺母起子一样使用，在末端增加一个棘轮以增加杠杆作用。

Spinner Handle

Use the sockets like a nut driver with the spinner handle, adding a ratchet to the end for extra leverage.

六角刀头

快速更换，并将1/4英寸的六角柄钻头适配1/4英寸的驱动工具。

Hex Bit Holder

Quickly change out and adapt any 1/4 inch hex shank bit to 1/4 inch drive tools.

储物箱

• 弹性高密度聚乙烯材料可承受普通润滑剂，燃料和溶剂的暴露
• 坚固的闩锁和带金属销的铰链
• 箱体内每个工具的模制尺寸标记

Storage?Case

• Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents
• Strong latches, and hinges with metal pins
• Molded size markings for each tool inside the case

产品尺寸? Specs

1/4 Inch Drive 6-Point Socket & Ratchet Set, 29-Piece (5/32-9/16 inch)

1/4英寸驱动器6点套筒和棘轮套件，29件（5 / 32-9 / 16英寸）

1/4 Inch Drive x 5/32 Inch 6-Point Socket

1/4 Inch Drive x 3/16 Inch 6-Point Socket

1/4 Inch Drive x 7/32 Inch 6-Point Socket

1/4 Inch Drive x 1/4 Inch 6-Point Socket

1/4 Inch Drive x 9/32 Inch 6-Point Socket

1/4 Inch Drive x 5/16 Inch 6-Point Socket

1/4 Inch Drive x 11/32 Inch 6-Point Socket

1/4 Inch Drive x 3/8 Inch 6-Point Socket

1/4 Inch Drive x 9/16 Inch 6-Point Socket

1/4 Inch Drive x 5/32 Inch Deep 6-Point Socket

1/4 Inch Drive x 3/16 Inch Deep 6-Point Socket

1/4 Inch Drive x 7/32 Inch Deep 6-Point Socket

1/4 Inch Drive x 1/4 Inch Deep 6-Point Socket

1/4 Inch Drive x 9/32 Inch Deep 6-Point Socket

1/4 Inch Drive x 5/16 Inch Deep 6-Point Socket

1/4 Inch Drive x 11/32 Inch Deep 6-Point Socket

1/4 Inch Drive x 3/8 Inch Deep 6-Point Socket

1/4 Inch Drive x 7/16 Inch Deep 6-Point Socket

1/4 Inch Drive x 1/2 Inch Deep 6-Point Socket

1/4 Inch Drive x 9/16 Inch Deep 6-Point Socket

1/4 Inch Drive x 6 Inch Quick-Release Ratchet

1/4 Inch Drive x 3 Inch Extension

1/4 Inch Drive x 6 Inch Extension

1/4 Inch Drive Universal Joint

1/4 Inch Drive x 1/4 Inch Hex Bit Holder