• 微处理器控制
  • 绝缘电阻高达10TΩ
  • 自动量程
  • 数字和条形图阅读
  • 自动化测试：
  • 吸收指数
  • 极化指数
  • 电容
  • 漏电流
  • 交流/直流电压表
  • 计时器长达90分钟
  • 可切换滤波器，消除外部噪声干扰
  • 步进电压测试
  • 实时时钟和日历
  • 内置打印机
  • 4000读数记忆
  • USB接口
  • 数据管理软件
  • 可充电电池
  • Microprocessor controlled
  • Insulation resistances up to 10TΩ
  • Auto-range
  • Digital & bargraph reading
  • Automated tests:
  • Absorption index
  • Polarization index
  • Capacitance
  • Leakage current
  • ac/dc voltmeter
  • Chronometer up to 90 minutes
  • Switchable filter to remove external noise?interference
  • Step voltage test
  • Real time clock and calendar
  • Built-in printer
  • 4000 readings memory
  • USB interface
  • Software for data management
  • Rechargeable battery

INS-6010kV数字绝缘测试仪是Tinsleys的尖端绝缘分析仪设备。功能强大的软件允许进一步分析测试结果，包括图形表示和自动报告生成等功能。其成熟的技术可提供安全，可靠和精确的绝缘电阻测量，最高可达10TΩ，具有4种预选测试电压，500V – 1kV – 5kV – 10kV。可以以25V，100V或500V的步长选择其他测试电压。

先进的微处理器控制设备操作，并结合先进的功能，使测量更容易：自动范围选择，4000读数记忆，交流/直流电压表，自动测量吸收指数和极化指数，漏电流和电容测量，定时器可以编程测试持续时间，可配置的通过 – 失败测试，??步进电压测试，实时时钟和日历。

内置天文台，指示测试开始后经过的时间，以分钟和秒为单位，最长可达90分钟。

测量值通过USB接口传输，并作为执行测试的注册打印在内置打印机中。此外，测量值存储在非易失性内部存储器中。最多可存储4000个测量值，然后传输到运行MegaLogg2程序的计算机。该软件允许进一步分析测试结果，包括图形表示和自动报告生成。实时时钟和日历以及顺序测试编号有助于识别每个测试，并通过趋势分析组织预测性维护系统。

INS-6010kV采用可充电电池供电，并配有自动充电器，可连接100 – 240V主电源。机柜坚固轻便，携带方便，抗冲击，适合在恶劣天气条件下使用。因此，兆欧表在实验室和现场提供非常可靠和准确的测量。

The digital insulation tester model INS-6010kV is Tinsleys’?cutting edge insulation analyzer equipment and it is one?of the most complete and sophisticated available in the?international market. A powerful software allows for?further analysis of tests results, including features such?as graphical representation and automatic report?generation. Its proven technology provides safe, reliable?and accurate measurements of insulation resistances?up to 10TΩ, with 4 pre-selected test voltages, 500V -?1kV – 5kV – 10kV. Other test voltages may be selected?in steps of 25V, 100V or 500V.

A state-of-the-art microprocessor controls the?equipment operation and enables the incorporation of?advanced features which make measurements easier:?auto-range selection, 4000 readings memory, AC/DC?voltmeter, automatic measurement of Absorption Index?and Polarization Index, leakage current and capacitance?measurement, timer enabling programming of test?duration, configurable Pass-Fail test, Step voltage test,?real time clock and calendar.

Built-in chronometer, indicating elapsed time, in minutes?and seconds, since the test started, up to 90 minutes.

Measured values are transmitted through the USB?interface and are printed in the built-in printer as a?registration of the performed test. Furthermore, the?measured values are stored in a non-volatile internal?memory. Up to 4000 measurements may be stored, to?be transferred afterward to a computer running the?MegaLogg2 program. This software allows a further?analysis of the test results, including a graphical?representation and automatic report generation. The?real time clock and calendar, and the sequential test?number, facilitates the identification of each test, and the?organization of a predictive maintenance system by?trend analysis.

The INS-6010kV is powered using a rechargeable battery?and has an automatic charger that may be connected to?100 – 240V mains supply. The cabinet is strong and?lightweight, easy to carry, impact-resistant and suitable?to be used under severe weather conditions. Thus the?megohmmeter supplies very reliable and accurate?measurements both in laboratory and out in the field.