INS-6005kV数字绝缘测试仪

特征

  • Microprocessorcontrolled
  • 绝缘电阻高达5TΩ
  • 自动量程
  • 数字和条形图阅读
  • 自动化测试：
    • 吸收指数
    • 极化指数
    • 电容
    • 漏电流
    • 交流/直流电压表
  • 计时器长达90分钟
  • 可切换滤波器，消除外部噪声干扰
  • 步进电压测试
  • 实时时钟和日历
  • 内置打印机
  • 4000读数记忆
  • USB接口
  • 数据管理软件
  • 可充电电池
  • 高压指示灯
  • 自动放电

INS-6005kV Digital Insulation Tester

Features

  • Microprocessorcontrolled
  • Insulation resistances up to 5TΩ
  • Auto-range
  • Digital & bargraph reading
  • Automated tests:
    • absorption index
    • polarization index
    • capacitance
    • leakage current
    • ac/dc voltmeter
  • Chronometer up to 90 minutes
  • Switchable filter to remove external noise interference
  • Step voltage test
  • Real time clock and calendar
  • Built-in printer
  • 4000 readings memory
  • USB interface
  • Software for data management
  • Rechargeable battery
  • High voltage indicator
  • Automatic discharge of potential

数字绝缘测试仪型号INS-6005kV是Tinsleys的绝缘分析仪设备之一。软件允许进一步分析测试结果，包括图形表示和自动报告生成等功能。其成熟的技术可提供安全，可靠和精确的绝缘电阻测量，最高可达5TΩ，具有4种预选测试电压，500V – 1kV – 2.5kV – 5kV。可以以25V，100V或500V的步长选择其他测试电压。

先进的微处理器控制设备操作，并结合先进的功能，使测量更容易：自动范围选择，4000读数记忆，交流/直流电压表，自动测量吸收指数和极化指数，漏电流和电容测量，定时器可以编程测试持续时间，可配置的通过 – 失败测试，??步进电压测试，实时时钟和日历。

内置天文台，指示测试开始后经过的时间，以分钟和秒为单位，最长可达90分钟。

测量值通过USB接口传输，并作为执行测试的注册打印在内置打印机中。

此外，测量值存储在非易失性内部存储器中。最多可存储4000个测量值，然后传输到运行MegaLogg2程序的计算机。该软件允许进一步分析测试结果，包括图形表示和自动报告生成。实时时钟和日历以及顺序测试编号有助于识别每个测试，并通过趋势分析组织预测性维护系统。

INS-6005kV使用可充电电池供电。机柜坚固轻便，携带方便，抗冲击，适合在恶劣天气条件下使用。因此，绝缘测试仪在实验室和现场提供非常可靠和准确的测量。

The digital insulation tester model INS-6005kV is one of?Tinsleys’ cutting edge insulation analyser equipment?and it is one of the most complete and sophisticated?available in the international market. A software allows?for further analysis of tests results, including features?such as graphical representation and automatic report?generation. Its proven technology provides safe, reliable?and accurate measurements of insulation resistances?up to 5TΩ, with 4 pre-selected test voltages, 500V – 1kV?- 2.5kV – 5kV. Other test voltages may be selected in?steps of 25V, 100V or 500V.

A state-of-the-art microprocessor controls the?equipment operation and enables the incorporation of?advanced features which make measurements easier:?auto-range selection, 4000 readings memory, AC/DC?voltmeter, automatic measurement of Absorption Index?and Polarization Index, leakage current and capacitance?measurement, timer enabling programming of test?duration, configurable Pass-Fail test, Step voltage test,?real time clock and calendar.

Built-in chronometer, indicating elapsed time, in minutes?and seconds, since the test started, up to 90 minutes.

Measured values are transmitted through the USB?interface and are printed in the built-in printer as a?registration of the performed test.

Furthermore, the measured values are stored in a nonvolatile?internal memory. Up to 4000 measurements?may be stored, to be transferred afterward to a?computer running the MegaLogg2 program. This?software allows a further analysis of the test results,?including a graphical representation and automatic?report generation. The real time clock and calendar, and?the sequential test number, facilitates the identification?of each test, and the organization of a predictive?maintenance system by trend analysis.

INS-6005kV is powered using a rechargeable battery. The?cabinet is strong and lightweight, easy to carry, impact resistant?and suitable to be used under severe weather?conditions. Thus the insulation tester supplies very?reliable and accurate measurements both in laboratory?and out in the field.