BLS120
电动母线处理单元
设计用于弯曲，穿孔，切割和弯曲铜或铝的母线，最大尺寸为120 x 12 mm。工作站必须与液压泵（最大压力700bar / 70MPa）组合使用。
BLS120
Electric bus bar processing unit
Designed to bend, perforate, cut and bend bus bars in copper or aluminium up to 120 x 12 mm. The work station must be combined with a hydraulic pump (Maximum pressure 700bar/70MPa).
技术特性：
?坚固紧凑，适用于车间和施工现场
?由基本单元和各种作业工具组成，可根据正在执行的任务进行互换
?简单快速换刀
?电子接近开关保证100％弯曲可重复性
?工作台高度调节，带有侧挡板，无需跟踪和测量孔
??无需跟踪和测量即可实现快速自动锁定连接
?刀具通过特殊形状的刀片实现清洁无毛刺切割
?精确一次操作中弓的尺寸弯曲
?穿孔和切割层压电源导轨和接地条
?液压和不可防尘帽的快速自动锁定连接
?产生的力：185 kN
?工作压力：700 bar（70 MPa）
?母线宽度：最大120 mm
?母线厚度：最大12 mm
Technical Characteristics:
? Sturdy and compact, suitable for use in workshops and onconstruction sites
? Composed of a base unit and a variety of work tools, interchangeable depending on the task being performed
? Simple and quick tool changing
? The electrical proximity switch guarantees 100% bending repeatability
? The work bench adjusts in height with a side stop to makeholes without tracing and measuring
? Quick automatic-lock connection of hydraulics and undetacha-ble dust cap
? Cutting tool for clean burr-free cuts by special shape of the blade
? Exact dimensional bending of bow in one operation
? Perforates and cutts laminated power rails and earthing strips
? Quick automatic-lock connection of hydraulics and undetacha-ble dust cap
? Force generated: 185 kN
? Operating pressure: 700 bar (70 MPa)
? Bus bar width: up to 120 mm
? Bus bar thickness: up to 12 mm
