Battery-Operated Cable Cutter/Crimper Kit, 2 Ah
BAT20-7T14
- Cuts and crimps copper, aluminum, ACSR, EHS Guy wire and Grade 8 steel bolts
- Includes tool, 3 cutting jaws, 3 crimping jaws, two 2 Ah batteries, charger and bag
- 7 ton hydraulic force cuts and crimps a larger capacity faster than similar models on the market
- Green light indicator confirms a good crimp has been made
- Two work lights illuminate darker spaces
- Replacement blades available
- Powered by DeWALT 20V lithium-ion batteries (2 Ah)
- Compatible with industry standard W-style dies
电池供电的电缆剪/压接器套件,2 Ah
BAT20-7T14
- 切割和压接铜,铝,ACSR,EHS Guy钢丝和8级钢螺栓
- 包括工具,3个切割钳口,3个压接钳口,两个2 Ah电池,充电器和包
- 7吨液压力切割和压接更大容量
- 绿灯指示灯确认已经完成了良好的压接
- 两个工作灯照亮较暗的空间
- 可提供替换刀片
- 由DeWALT 20V锂离子电池供电(2 Ah)
- 兼容行业标准W型模具
Klein’s battery-operated cable cutter/crimper is engineered to make linemen’s work more efficient by reducing the time and effort needed on the job. Alternate between 6 heads according to what the job requires. 7-tons of hydraulic force cut and crimp a larger capacity faster than similar models on the market. Compatible with industry standard W-style dies. Powered by a DeWALT lithium-ion battery. Includes 3 cutting heads, 3 crimping heads, two 2 Ahbatteries, a charger and a bag.
Specifications
Type:
Battery Operated
Application:
Cable Cutting/Crimping
Special Features:
Powered by DeWALT 20V Lithium-ion Batteries (2 Ah)
Maximum Cable Capacity (Copper):
750 MCM
Maximum Cable Capacity (Aluminum):
1000 MCM
Maximum Cable Capacity (ACSR):
556 MCM
Maximum Cable Capacity (Guy Strand):
3/8” EHS
Bolt Maximum Capacity:
3/8” Grade 8
Overall Length:
26” (660.4 mm)
Overall Height:
12” (304.8 mm)
Overall Width:
6” (152. 4 mm)
Material:
ABS, PA6, GF20%, TPE
Batteries:
Lithium-ion
Battery Life:
2 Ah
Voltage:
20V
Included:
(3) Cutting Jaws, (3) Crimping Jaws, (2) 2 Ah Batteries, Charger and Bag
Weight:
32.1 lb (14.6 kg)
UPC:
092644630897
WARNINGS
- Always use approved eye protection.
- Do not use to pry or chisel.
- Not insulated. Will not protect against electrical shock.
- NEVER operate without dies.
Klein的电池驱动电缆剪/压接机旨在通过减少工作所需的时间和精力,使线路工人的工作更高效。根据工作需要在6个头之间交替。7吨液压力切割和压接容量更快。兼容行业标准W型模具。由DeWALT锂离子电池供电。包括3个切割头,3个压接头,2个Ahbatteries,一个充电器和一个袋子。
产品规格
类型:
电池供电
应用:
电缆切割/压接
特殊功能:
由DeWALT 20V锂离子电池供电(2 Ah)
最大电缆容量(铜):
750 MCM
最大电缆容量(铝):
1000 MCM
最大电缆容量(ACSR):
556 MCM
最大电缆容量(Guy Strand):
3/8”EHS
螺栓最大容量:
3/8”8年级
总长度:
26”(660.4 mm)
总体高度:
12”(304.8 mm)
总宽度:
6”(152.4 mm)
材料:
ABS,PA6,GF20%,TPE
电池:
锂离子
电池寿命:
2啊
电压:
20V
包括:
(3)切割钳口,(3)压接钳口,(2)2 Ah电池,充电器和袋子
重量:
32.1磅(14.6千克)
UPC:
092644630897
警告
- 始终使用认可的眼睛保护。
- 不要用来撬或凿。
- 没有绝缘。不会防止电击。