Grip-It Five Key Ball Hex Set – Metric

70572

  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem
  • Tough, heat-treated alloy steel
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Holder serves as a handle
  • Two key positions (straight-out or right angle) for extra leverage
  • Ball design allows for a thicker neck diameter increasing torque capacity while maintaining operational angles to 25-Percent

Grip-It五键球六角套装 – 公制

70572

  • 方便的套装可轻松放入口袋或工具箱，有助于消除丢失的钥匙问题
  • 坚韧，经过热处理的合金钢
  • 六角扳手末端采用方形切口，可实现 深度配合，并很大程度地接触内六角插座，以防止插座滑脱和剥落
  • 持有人作为手柄
  • 两个关键位置（直线或直角）以获得额外的杠杆作用
  • 球形设计允许更粗的颈部直径增加扭矩容量，同时将操作角度保持在25％

The Klein 70572 5-Metric Sizes Grip-It Hex Key Set has a ball design that allows for a thicker neck diameter which increases the torque capacity while maintaining operational angles to 25 percent. The keys are industrial strength, impact-resistant and tested for performance to below freezing temperatures. Key sizes are: 5mm, 6mm, 7mm, 8mm, 10mm, and the blades rotate independently up to 270 degrees.

Specifications
Size:
5 mm, 6 mm, 7 mm, 8 mm, 10 mm
Handle Length:
4.438” (112.7 mm)
Key Lengths:
1.594 to 1.938” (40.5 to 49.2 mm)
Color:
Red
Weight:
0.58 lb (0.26 kg)
UPC:
092644332876
WARNINGS
  • Always wear approved eye protection.
  • NOT insulated. Will NOT protect against electrical shock.
  • Do NOT use a pipe or similar extension to increase leverage.

Klein 70572 5公制尺寸Grip-It六角扳手套件采用球形设计，允许更粗的颈部直径，从而增加扭矩容量，同时将操作角度保持在25％。关键是工业强度，抗冲击性能，并测试性能低于冰点温度。按键尺寸为：5mm，6mm，7mm，8mm，10mm，刀片可独立旋转270度。

产品规格
尺寸：
5毫米，6毫米，7毫米，8毫米，10毫米
手柄长度：
4.438”（112.7 mm）
密钥长度：
1.594至1.938”（40.5至49.2 mm）
颜色：
红色
重量：
0.58磅（0.26千克）
UPC：
092644332876
警告
  • 始终佩戴认可的护目镜。
  • 没有绝缘。不会防止电击。
  • 不要使用管道或类似的扩展来增加杠杆作用。