英文简介

Knurled Jaw Grip 0.75-Inch Cable Capacity

1672-10

Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable
Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks
When latch is closed, it helps maintain cable position in grip jaws
Same as Cat. No. 1671-10 but with knurled jaws

中文简介

滚花钳口，0.75英寸电缆容量

1672-10

更长的钳口可以牢牢固定，减少滑动和损坏电缆的可能性
设计包括一个闩锁，以及一个大直径的眼睛，可以容纳起重机，绞车和滑车组件上的大钩子
当闩锁闭合时，它有助于保持夹爪中的电缆位置
与目录671-10号相同，但带有滚花钳口

英文参数

The Klein Tools 1671-10 Parallel Jaw Grip works with a wide range of cable types and sizes. The longer jaws provide a firm hold on the cable, reducing the possibility of slippage and deformation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.

Specifications

Application:

Wire Pulling

Special Features:

Extended Jaw

Cable Type:

Aircraft, Messenger, Guy Strand

Cable Diameter:

0.37” to 0.75” (9.40 to 19.05 mm)

Jaw Type:

Double V – Serrated

Jaw Length:

4.375” (111.1 mm)

Maximum Safe Load:

10,000 lb (4536 kg)

Weight:

4.4 lb (2.0 kg)

UPC:

092644471483

WARNINGS

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.

中文参数

Klein Tools 1671-10 Parallel Jaw Grip适用于各种类型和尺寸的电缆。较长的钳口可牢牢固定电缆，减少滑动和变形的可能性。所有Klein手柄均采用定制的锻造钢制造，经过机械加工和热处理，具有耐用性。每个手柄都经过单独手动检查和启动，以确保正常工作。握把也经过严格测试并拉至额定负载，以确保质量和可靠性。