刚性铝轨道竖向锚固线系统
参考：VERTEX PN 8000
这种垂直防坠落锚固系统是一种集成的防坠落解决方案，由垂直铝合金导轨制成，在导轨上滑动导向式??防摔手推车。
该生产线是通过连接长度为3 mtrs的铝制导轨中间体构建的。串联使用Junction将它们相互连接，并使用Rung Clamps将它们固定到梯级。小车在与自动锁定钢制Karabiner连接的用户随行的线路上上下移动。
在跌落的情况下，内置有减震功能的手推车立即锁定在轨道上，从而阻止坠落。此外，在不使用时，手推车的单向锁定系统可防止其自行滑落。
导轨带有一个伸展臂，在工作平台上方的梯形端弯曲。这使得登山者即使在梯子终端也可以与手推车连接，确保完全安全。
最下面的部分是铝制导轨末端，其末端配有一个锁，可以防止小车从导轨中移出。
该系统还有一个检查铭牌，安装在梯子的第一个梯级上，用于识别，追溯和维护检查记录。一根不锈钢扎带用于将系统铭牌固定到结构上。在安装时，通过数字冲头在板上冲压相关细节。在检查和重新验证后，每年在板上打出重新验证日期。
该系统可用于电信塔，无线电和电视桅杆，电力和水力发电设施，风力发电设施，建筑，烟囱和工业厂房，建筑物和外墙，起重机装置，轴和检修孔，飞机库以及装载/卸载火车和车辆，石油化工厂，岸上和海上石油钻井平台，以及造船。
Vertical Anchorage Line System on Rigid Aluminium Rail
Ref : VERTEX PN 8000
This Vertical fall Arrest Anchorage system is an integrated Fall Arrest solution made of a Vertical Aluminium Alloy Guide Rail over which glides a Guided-Type Fall Arrest Trolley.
The line is constructed by attaching the Aluminium rail Intermediates of length 3 mtrs. in series using a Junction to connect them to each other, and Rung Clamps to affix them to the ladder rungs. The trolley moves up and down on the line accompanying the user who is connected to it with an Auto-locking Steel Karabiner.
In the event of a fall, the trolley which is inbuilt with Shock Absorption feature, immediately locks over the Rail, thus arresting the fall. Also, while not in use, the Uni-directional locking system of the Trolley prevents it from sliding down on its own.
The Rail comes with an Extension Arm that curves at the Ladder-end over the working platform. This allows the climbers to be connected with the trolley even at the Ladder termination, ensuring complete safety.
The bottom most section is the Aluminium Rail Extremity which is equipped at the end with a lock that prevents the trolley from moving out of the rail.
The system also has an Inspection Name Plate which is installed on the first rung of the ladder for identification, traceability and maintenance of inspection records. One stainless steel cable ties are used to fasten the System Name Plate to the structure. At time of installation, the relevant details are punched on the plate by a number punch. The revalidation dates are punched each year on the plates after inspection and revalidation.
This system can be used on telecommunication towers, radio and TV masts, power supply and hydroelectric installations, wind power facilities, construction, chimney and industrial plants, buildings and facades, crane installations, shafts and manholes, aircraft hangars and for loading/ unloading of trains and vehicles, petrochemical plants, on-shore and off-shore oil rigs, and ship-building.
