Chicago Grip Bell-System Type Grip
1692-5AT
- For 0.218 to 0.550-Inch (5.54 to 13.97 mm) diameter cable range
- Aggressive jaw pulls steel strand cable
- Max Safe Load of 8000-Pound (3629 kg)
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Outside diameter of support wire includes thickness of polyethylene coating
- For support wire 0.134 and larger, refer to 1659 series
Chicago GripBell系统型握把
1692-5AT
- 适用于0.218至0.550英寸（5.54至13.97 mm）直径的电缆系列
- 下颚拉动钢绞线
- 安全载荷8000磅（3629千克）
- 配有链条，肘节和卸扣，以防止抓地力从电缆上脱落
- 支撑线的外径包括聚乙烯涂层的厚度
- 对于0.134及以上的支撑线，请参阅1659系列
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
Specifications
Type:
”L” Strand Puller
Cable Type:
Steel Strand
Cable Diameter:
0.218” to 0.55” (5.54 to 13.97 mm)
Jaw Type:
Double V
Jaw Length:
5” (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.6 lb (2.99 kg)
UPC:
092644471858
WARNINGS
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
设计用于铝，铜，防风雨涂层电线，PVC覆盖导体和信使和绞线。芝加哥式握把设计用于0.12英寸至1.0英寸（3.10至25.4毫米）的电缆尺寸。配备链条，拨动和卸扣。对于0.134英寸或更大的支撑线，请参阅1659系列。支撑线的外径包括聚乙烯涂层的厚度。
产品规格
类型：
”L”Strand Puller
电缆类型：
钢绞线
电缆直径：
0.218英寸至0.55英寸（5.54至13.97毫米）
颚类型：
双V
下颚长度：
5”（127.0 mm）
最大安全载荷：
8000磅（3629千克）
重量：
6.6磅（2.99千克）
UPC：
092644471858
警告
- 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
- 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
- 不要超过额定容量。
- 始终将适当尺寸和类型的手柄与应用相匹配。
- 把手用于临时安装，而不是用于永久性锚固。
